Silicon Nitride
Material properties Norm Symbol/Unit EKatherm®
Density DIN EN 623-2 ρ [g/cm3] >3.24
Porosity DIN EN 623-2 P [%] <0.5
Mean grain size [μm] <2
Aspect ratio (L/D) 3-5
Phase composition β-Si3N4, Oxide
Vickers hardness DIN EN 843-4 HV 1 [GPa] 15
Knoop hardness DIN EN 843-4 HK 0.1 [GPa] 15
Young's modulus DIN EN 843-2 E [GPa] 300
Weibull modulus DIN EN 843-5 m 15
Flexural strength, 4-pt bending DIN EN 843-1 σB [MPa] 700
Compressive strength DIN 51104 σD [MPa] >2500
Poisson ratio DIN EN 843-2 ν 0.28
Fracture toughness (SENB) Klc [MPa·m0,5] 7
Coefficient of thermal expansion DIN EN 821-1
25°C - 500°C α [10-6/K] 2.5
500°C - 1000°C α [10-6/K] 3.9
Specific heat at 25°C DIN EN 821-3 cp [J/g K] 0.65
Thermal conductivity at 25°C DIN EN 821-2 λ [W/m K] 27
Thermal stress parameters calculated
R1 = σB·(1-ν) / (α·E) [K] 672
R2 = R1·λ [W/mm] 18
Specific electrical
resistance at 25°C
DIN EN 50359 ρ [Ω cm] >1011